Since October 30, 2026, parts and components imported under Mexican tariff item 9803.00.01 require a prior import permit from Mexico's Ministry of Economy (Secretaría de Economía) to enter as a permanent import or into the bonded warehouse regime. That permit completes what the decree published in the Diario Oficial de la Federación (DOF), Mexico's federal gazette, on October 13 started: it exempted the tariff item from the General Import Duty (IGI), previously 10%, for five years starting October 14.
In the days that followed, the measure circulated as "zero tariff on auto parts." The published text is narrower. The exemption covers a single tariff item in Chapter 98 of the Mexican tariff schedule (TIGIE). It is available to vehicle manufacturers, which Mexican law calls the terminal automotive industry, that hold a bonded warehouse authorization for vehicle assembly and manufacturing, and it is subject to guidelines from the Ministry of Economy. On October 16, the Ministry itself specified that the universe of potential beneficiaries is 11 light-vehicle manufacturers with production facilities in Mexico.
For a Tier 1 or Tier 2 supplier that imports components under the tariff classification that corresponds to each product, the decree leaves the duty where it was. This guide separates what changed from what stayed the same, lays out the dates, and sets out what to review on each side of the supply chain.
One tariff item in Chapter 98, three conditions
Chapter 98 of the TIGIE groups special operations. Its tariff items let certain companies, under specific conditions, declare goods under an item different from the one their nature would call for. Item 9803.00.01 is one of them, and its description in the tariff schedule contains the three conditions that decide who can use it:
- Terminal automotive industry. The item is reserved for companies that assemble and manufacture automobiles. An auto parts supplier falls outside that definition even if it sells its entire output to an automaker.
- Bonded warehouse authorization for vehicle assembly and manufacturing. This is the arrangement provided for in Article 121, fracción IV, of the Ley Aduanera (Mexico's Customs Law), which the customs authority grants to vehicle manufacturers under the requirements and formalities that the SAT (Mexico's tax authority) sets by rule.
- Ministry of Economy guidelines. The description conditions use of the item on the company complying with the guidelines the Ministry issues.
The October 13 decree, signed on October 9 under Article 4, fracción I, of the Ley de Comercio Exterior (Mexico's Foreign Trade Law), changed a single data point in that item: the rate. The three conditions were already in the description, and the decree's own recitals quote it as it stood. The exemption therefore reaches whoever could already use the item, at an exempt rate instead of 10%, and whoever meets those conditions while the decree is in force.
The bonded warehouse condition carries the most weight in practice. Under that authorization, the automaker brings parts and components into its plant under the bonded warehouse regime for assembly. The authorization predates the decree and has its own requirements, so a company that does not hold one today cannot start using 9803.00.01 overnight.
Two clarifications complete the scope. First, the decree amends the tariff schedule, which means the General Import Duty. VAT and the Customs Processing Fee (DTA) follow their own rules. Second, the neighboring item, 9803.00.02, for assembling trucks, integral buses and tractor-trailers, does not appear in the decree's single article, so its tariff treatment did not change.
October 13 to October 30: the dates that shaped the exemption
The exemption came together in three publications over a little more than two weeks, and one piece is still pending.
On October 13, the DOF published the decree amending the tariff schedule. It took effect the next day, October 14, for five years from that date, through October 2031. The recitals state the purpose: to attract production lines for light vehicles that Mexico currently imports, starting with simpler assembly models, so that they lead later to more complex processes and to supplier development in Mexico.
On October 16, the Ministry of Economy issued an information note to clarify the scope. It specified that only companies with production facilities in the country, 11 light-vehicle manufacturers, could import under 9803.00.01 duty-free, and it previewed the content of the guidelines: minimum production volumes of complete vehicles in Mexico, import limits proportional to that production, and control mechanisms run by the SAT and Mexico's National Customs Agency (ANAM). The Ministry also stated that the measure leaves out companies without production facilities in the country and vehicles from countries with which Mexico has no trade agreement.
On October 29, the DOF published the agreement amending the Ministry of Economy's foreign trade rules and criteria (Reglas y criterios de carácter general en materia de comercio exterior). The agreement adds item 1 BIS to Anexo 2.2.1, which subjects goods under 9803.00.01 to a prior import permit when they enter as a permanent import or into the bonded warehouse regime. It also adds fracción III BIS to rule 2.2.4, which assigns those permits to the Ministry's Directorate General for Trade Facilitation and Foreign Trade, subject to a favorable opinion from its Directorate General for Heavy and High Technology Industries (DGIPAT). The agreement took effect on October 30, and the requirement stays in place for as long as the decree does.
The pending piece is the guidelines. The agreement makes the favorable opinion conditional on the company proving it meets them, and provides that they will be published in the SNICE, the Ministry's National Foreign Trade Information System. Before scheduling any import under this item, confirm in the SNICE whether they are available and what they require.
If your company imports assembly material and wants to confirm whether any of its operations fit item 9803.00.01, talk to a Joffroy expert.
The blind spot: reading the exemption as if it reached suppliers
The broad reading of the headline has a practical consequence along the supply chain. A supplier that imports wire harnesses, seats, electronic modules or stamped parts declares each product under the tariff classification that corresponds to it, in chapters such as 84, 85 or 87 of the tariff schedule. The decree did not touch any of those items. Their duty, and any preference the company already uses under USMCA (T-MEC), an IMMEX Program or a Sector Promotion Program (PROSEC), stays exactly as it was before October 13.
An illustrative case shows where the error forms. A Tier 1 supplier in Mexico's Bajío region imports electronic modules from Asia to integrate into an instrument panel it delivers to an automaker. During the October cost review, the commercial team reads that the tariff on auto parts dropped to zero and recalculates landed cost at that rate. The quote built on that calculation for the automaker's next program carries a saving that customs will never recognize. Every pedimento (Mexico's customs declaration) the supplier files will keep declaring the modules' own tariff item at its current rate, because the supplier is not part of the terminal automotive industry, holds no automotive bonded warehouse authorization, and cannot apply for the Anexo 2.2.1 permit.
The same error can travel in the opposite direction. An automaker that does qualify could assume the benefit extends to parts it buys from domestic suppliers that, in turn, import them. The exemption reaches only what the automaker itself imports under 9803.00.01, with its permit and within the proportional limits the guidelines set.
Check this today. Ask your customs broker for the list of tariff items declared on your import pedimentos over the last three months. If none starts with 9803, the October 13 decree did not change the duty on your operation, and any cost or quote that assumes otherwise needs correcting.
What to review before the next import, by your place in the supply chain
With three Mexican customs broker licenses (Patentes Nacionales) and more than 190,000 customs operations a year across more than 39 ports, we see that a tariff measure lands without surprises when the company has documented the tariff classification of each product and knows which instrument covers each operation. That is the basis for the reviews below.
For an automaker that may qualify:
- Confirm the bonded warehouse authorization for vehicle assembly and manufacturing and its validity, under the requirements the SAT sets pursuant to Article 121, fracción IV, of the Ley Aduanera.
- Check the SNICE for the published guidelines and measure the operation against what the Ministry previewed: minimum production volumes of complete vehicles and an import cap proportional to that production.
- Obtain the prior import permit from the Ministry of Economy before declaring any line under 9803.00.01 duty-free, keeping in mind that the decision runs through the DGIPAT opinion.
- Adjust the bonded warehouse calendar. Pedimentos under that regime become subject to the Manifestación de Valor Electrónica (MVE), Mexico's electronic customs value declaration, on December 15, 2026, under the regime-by-regime calendar the SAT released in an advance version of the Third Resolution of Amendments to the 2026 Reglas Generales de Comercio Exterior (RGCE).
For a Tier 1 or Tier 2 supplier:
- Keep each product's tariff classification in your cost models and quotes, with the current rate and the preference that actually applies.
- Review the instruments within your reach: USMCA origin, the IMMEX Program and PROSEC. The decree changed none of them.
- Align the conversation with your automaker customer. If the automaker rethinks what it imports directly under 9803.00.01 and what it buys from domestic suppliers, that decision reaches your volumes, and you want to know it before the next program closes.
What changes in each side's routine
For the manufacturers that may qualify, 9803.00.01 adds a step to the routine for five years: a prior import permit covering the permanent imports and bonded warehouse entries where they want to use the exemption, subject to the limits the guidelines set. For the rest of the supply chain, the daily pedimento is filed the same way as before October 13, with each product's tariff classification. The commercial conversation does move: through October 2031, each automaker decides what it assembles with parts imported under 9803.00.01, and that decision becomes a data point suppliers need in their planning.
. . .
To review the tariff classification of your auto parts and the instruments that apply to your operation, talk to a Joffroy expert.
TRADE. UNDER CONTROL.



